C7012A,C,E,F,G Solid State Purple Peeper Ultraviolet Flame Detectors
The C7012A,C,E,F,G Flame Detectors are solid-state electronic devices for sensing the ultraviolet radiation emitted during combustion of most carbon-containing fuels such as natural gas, LP gas, and oil.
Used with the Honeywell controls using the flame rectification principle.
C7005 A is for continuous pilot applications. It includes an insulated flame rod, properly positioned relative to the flame retention type nozzle.
Solid-state electronic circuitry provides low power consumption and high reliability
Solid-state models directly replace previous models with vacuum electron tube circuitry.
Detectors can be mounted horizontally, vertically or at any angle. The self-checking C7012E,F models require faceplate alignment and have integral locating reference points to assure proper shutter mechanism operation.
Ultraviolet radiation sensing tube and quartz viewing window are field replaceable.
Threaded conduit fitting and color-coded leadwires allow rapid electrical installation.
Two flame detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.
A swivel mount is available to facilitate flame sighting
Models are available with a -40蚌 (-40蚓) rating.
Designed for use with Honeywell Flame Safeguard Controls using Honeywell Rectification (R7247A, R7289A, R7847A1082) and Ampli-Check. Rectification (R7247B, R7847B1072) Flame Signal Amplifiers.
C7012G models available to meet BGC (British) and DIN (German) requirements.
Incorporate UV sensor tube checking feature; used with Honeywell Dynamic Self-Check (R7247C, R7847C) Flame Signal Amplifiers