- Display 30 Products per page
Products
- Rosemount Hi-Temp 5081Traditional in situ oxygen flue gas analyzers utilize zirconium oxide sensors to measure excess oxygen in process flue gas. These zirconium oxide sensors use a principle of operation based on the Nernst equation. This principle requires that the sensor cell be maintained at a high operating temperature using a heater that is powered via the analyzer’s electronics.
- Field Indicators
- The Fireye Phoenix 85UVF/IRF
- IDD ScannerForney fs Intelligent Dynamic Detector (IDD) II Series is designed to accurately detect and discriminate the luminous flames produced by burning oil, coal, and lignite fuels.
- Testo 300 Combustion AnalyzerTesto 300 - flue gas analyzer
- Fireye-65UV5-1004
- Portaflow PF44OIP
- Fireye-70D40
- Fireye-25SU3-2100
- Forney- High Energy Spark IgniterForney High Energy Spark Igniter provides a highly reliable, non-fouling source of ignition for oil or gas igniters or small burners
- Turbine Flowmeters
- Fireye-45RM4-1000
- Honeywell STD700
- Power Pack HESI-UTCThe High Energy Spark Igniter, HESI Series 90 is a Class 3 Igniter used for direct spark ignition of oil or gas igniters or small burners. The 12 joules of energy delivered to the spark tip (3 sparks per second) easily ignites the fuel.
- Hazardous Area OxymitterThe Oxymitter In Situ Oxygen Transmitter was the world’s first in situ, zirconium oxide-based oxygen transmitter for flue gas measurement. These oxygen measurements can be used in a control system or by a boiler operator to fine tune burner fuel/air ratios for maximum efficiency.
- Testo 350 Portable Emission Analyzer-IndustrialThe ultra-rugged construction, coupled with a simple intuitive operation and innovative emeasurement technology, sets the new standard in emission testing and combustion analysis.
- Honeywell V4055A,B,D,EThe V4055 Gas Valve Actuator, in combination with a VE5000a, V5055 or V5097 Gas Valve, controls the gas supply to commercial and industrial burners. When replacing a V4034 with a V4055, the V5034 gas valve must also be replaced with a V5055 or V5097 gas valve.
- Signal Conditioners
- Maxon ValvesNormally closed shut-off valves are used in burner system fuel supply lines on industrial boilers, furnaces, ovens, kilns, and other heating processes. All valves are designed to shut-off fuel automatically and instantly with any interruption in the electric power supplied through your safety circuit.
- Honeywell C7005A,BThe C7005A,B Gas Pilot Burner Assemblies include a flame rod to prove the pilot flame. The assemblies are used with a suitable flame safeguard control on industrial or commercial gas burners or oil burners with gas pilots.
- PCME Particulate Measurement System
- Honeywell EC7823A;RM7823AThe Honeywell EC/RM7823A Relay Module is a microprocessor based flame detector relay that can be fitted with any 7800 SERIES Flame Amplifier to provide relay action from one dpdt relay when flame is or is not present. The EC/RM7823A system consists of a relay module, wiring subbase and flame amplifier. Options include keyboard display module (KDM), personal computer interface, Data ControlBus Module., remote display mounting and Combustion System Manager. Software.
- Ratemeters & Totalizers
- Cairsens Sensor
- Rosemount- Bypass PDS-106-302-A01Provides the same accurate, reliable measurement of excess oxygen in combustion flue gas as standard in situ, industrial oxygen analyzer
- MAF/RF Pickups
- INSIGHTII Scanner Type95Dss3 Integrated Flame Scanner
- Portaflow 330 (PF330)
- MIR9000
- Honeywell C7012A,C,E,F,GThe C7012A,C,E,F,G Flame Detectors are solid-state electronic devices for sensing the ultraviolet radiation emitted during combustion of most carbon-containing fuels such as natural gas, LP gas, and oil.
BRANDS
- Honeywell (5)
- Maxon Valves (1)
- Featured (6)
- FlowMetrics (8)
- Copaltite (1)
- Fireye (11)
- Micronics (2)
- Altech (3)
- Honeywell Process Solutions (4)
- Rosemount (8)
- Testo (6)
- Forney (5)
MID-SOUTH SALES CO., INC.
OFFICE HOURS
Mon – Fri: 8am – 4:30 pm
Saturday: Closed
Sunday: Closed